If the mechanism of a tension does not provide a necessary tension of a belt or the bearing or a pulley of a tension roller is worn out, replace the tension mechanism поликлинового a belt.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
|
Fig. 2.16. Tension easing поликлинового a belt on cars since 2001: 1 – шестигранник the tension mechanism
|
Establish
накидной a key on
шестигранник the tension mechanism, turn it clockwise for easing of a tension of a belt and remove a belt from pulleys (
fig. 2.16). Slowly release the mechanism of a tension of a belt.
|
Fig. 2.17. An arrangement of a bolt and a nut of fastening of the mechanism of a tension поликлинового a belt on cars since 2001
|
Turn out a bolt and a nut and remove the tension mechanism
поликлинового a belt (
fig. 2.17).
Establish the new mechanism of a tension поликлинового a belt and fix its bolt and a nut, having tightened their demanded moment.
Establish поликлиновой a belt.