Recommended periodicity: each 12 000 km of run or 6 months.
сматривайте also check their serviceability. If belts act in film for any reason provide their correct installation.
For non-failure operation of the mechanism of a tension observe cleanliness of seat belts.
At damage of buckles or the mechanism of their tension replace belts.
Also replace belts which were exposed to a strong stretching at failure.
At influence of solar beams and chemical substances the belt tape loses durability. As a sign of ageing of a material of a belt loss of initial colouring (fading) can serve. Such belt too replace.
Replace belts always in the complete set. It is forbidden to establish buckles and mechanisms of a tension of the belts, not intended for the given sitting, or from other cars.
Check up a condition of all places of fastening of a belt. Fastening bolts should be reliably tightened. Remove any traces of corrosion in those places where the belt fastens to a body. The details of fastening amazed with corrosion replace.
Replace belts also at detection of following damages:
– Ruptures of threads or «разлохмачивание»;
– Cuts of eyelets on belt edges;
– Curvature of a band;
– Presence выкрошенных sites or cuts;
– Insufficiently reliable fixing of a belt;
– Easing of the button of an unblocking of a belt;
– The buckle does not release a belt;
– The effort necessary for clearing of a belt has increased;
– On a buckle surface there are cracks.