Generator removal make as follows:
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Remove a belt of a drive of the generator.
|
|
Fig. 15.16. Elements of fastening of the generator on models till 2001: 1 – шарнирный a bolt; 2 – an adjusting bolt; 3 – connecting wires of the generator; 4 – an electric socket; 5 – the generator; 6 – a belt of a drive of the generator
|
|
|
Fig. 15.17. Elements of fastening of the generator on models since 2001 of release: 1 – a belt of a drive of the generator; 2 – bracket fastenings of wires; 3 – connecting wires of the generator; 4 – the generator; 5 – an electric socket; 6 – bracket fastenings of wires; 7 – a clip of fastening of wires
|
Disconnect wires and electric sockets from the generator (
fig. 15.16,
15.17)
On models till 2001 turn out adjusting and шарнирный bolts.
|
|
Fig. 15.18. An arrangement of bolts of fastening of the generator on models since 2001
|
On models since 2001 turn out bolts of fastening of the generator (
fig. 15.18).
Remove the generator from the car.
Generator installation make in sequence, return to removal, taking into account the following:
If the new generator is established, rearrange on it a pulley from the old generator.
Check up the pressure developed by the generator.