Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
11. Brake system
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
   The general data
   Technical characteristics
   Electric chains
   Check of the storage battery
   Replacement of wires of the storage battery
   Safety locks and the relay
   Check and replacement of the relay of indexes of turn and the emergency light alarm system
   Check of system of gymnastics
   The generator
   System of start-up of the engine
   Replacement combined подрулевых switches
   Replacement of the lock and the cylinder of the lock of ignition
   Removal and installation of switches of the panel of devices
   Removal and installation of a combination of devices
   Check and replacement of the engine of a screen wiper
   Radio receiver and dynamics
   Aerial replacement
   Check and repair of a heater of back glass
   Replacement of lamps in headlights
   Adjustment of light of headlights
   Headlight replacement
   Sound signal
   Replacement of lamps накаливания
   Check of a drive of external rear-view mirrors
   Check of system of the cruise-control
   Check стеклоподъемников with an electric drive
   Check of system of the central blocking of locks
   Drive podemno-sdvizhnoj roof panels
   Safety pillows
Electric equipment schemes




Toyota RAV4>> Electric equipment>> Sound signal
       THE PREVENTION
Cars are equipped by safety systems (SRS), including pillows of safety and натяжители seat belts. Before work about gauges of blow, the panel of devices and a steering column disconnect at first negative, and then positive the plug from the storage battery and wait 2 minutes It will exclude unapproved disclosing of pillows of safety and operation натяжителей seat belts which can put physical injuries.

Check of a sound signal make as follows.
Check up integrity of safety locks in an electric chain of a sound signal.
Disconnect an electric socket from a sound signal.
Additional wires submit pressure from the storage battery to a sound signal. If the signal does not work, replace it.
If the sound signal works, check up pressure in an electric socket by pressing of the button of inclusion of a sound signal. If pressure on a socket is present, check up connection of a sound signal with "weight".
In the absence of pressure on an electric socket check up the relay of a sound signal.
If the relay is serviceable, check up a chain of giving of pressure to contacts of the relay and a chain of management of the relay. In the absence of pressure on the relay check up an electric chain between the relay and the block of safety locks.
If pressure moves to the relay, press the button of a sound signal and check up an electric chain between the relay and the button. If the electric chain is serviceable, replace the button of inclusion of a sound signal.
Replacement of a sound signal make as follows.
Remove a forward bumper.

Fig. 15.52. An arrangement of bolts of fastening of sound signals


Disconnect an electric socket, turn out a bolt and remove a sound signal (fig. 15.52).
Installation of a sound signal make in sequence, return to removal.