Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
11. Brake system
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
   The general data
   Technical characteristics
   Electric chains
   Check of the storage battery
   Replacement of wires of the storage battery
   Safety locks and the relay
   Check and replacement of the relay of indexes of turn and the emergency light alarm system
   Check of system of gymnastics
   The generator
   System of start-up of the engine
   Replacement combined подрулевых switches
   Replacement of the lock and the cylinder of the lock of ignition
   Removal and installation of switches of the panel of devices
   Removal and installation of a combination of devices
   Check and replacement of the engine of a screen wiper
   Radio receiver and dynamics
   Aerial replacement
   Check and repair of a heater of back glass
   Replacement of lamps in headlights
   Adjustment of light of headlights
   Headlight replacement
   Sound signal
   Replacement of lamps накаливания
   Check of a drive of external rear-view mirrors
   Check of system of the cruise-control
   Check стеклоподъемников with an electric drive
   Check of system of the central blocking of locks
   Drive podemno-sdvizhnoj roof panels
   Safety pillows
Electric equipment schemes


атмос жидкость для электронных сигарет купить оптом от производителя.


Toyota RAV4>> Electric equipment>> Replacement of lamps накаливания
       THE PREVENTION
Before lamp replacement накаливания remove a wire of "weight" from the storage battery.
Remember: if the lamp just burnt, it can be too hot.
Before lamp replacement накаливания check up a corresponding electric chain and a safety lock.
Do not concern a glass flask of a lamp barehanded. Fatty traces on a lamp lead to dimness of a flask and a fast exit of a lamp out of operation. Necessarily replace the failed lamps with lamps of the same type. Fatty stains arising on imprudence wipe pure безворсовой a rag or spirit

Replacement of a lamp of the forward index of turn make as follows.

Fig. 15.53. An arrangement of the screw of fastening of glass of the forward index of turn


Turn out the screw of fastening of glass of the forward index of turn and for access to a lamp take glass aside (fig. 15.53).
Turn a cartridge with a lamp counter-clockwise and remove it together with a lamp from the turn index. Take a lamp from a cartridge.
Lamp installation make in sequence, return to removal.
Replacement of lamps in a back lantern on models till 2001
Open a luggage space door, turn out the screw and remove the decorative cover located under a back lantern.
Turn out 2 screws located in the bottom part of a lantern, and separate a lantern from a body.
Turn a cartridge with the fused lamp counter-clockwise and remove it together with a lamp from a back lantern. Take a lamp from a cartridge.
Lamp installation make in sequence, return to removal.
Replacement of lamps of back lanterns by models since 2001
Uncover, located opposite to a lantern.

Fig. 15.54. Removal of a cartridge from a lamp from a back lantern on models since 2001


Turn a cartridge with a lamp counter-clockwise and remove it together with a lamp from a back lantern (fig. 15.54). Take a lamp from a cartridge.
Lamp installation make in sequence, return to removal.
Replacement of a lamp of the top stoplight
Open a door of a luggage space and remove the plastic cover closing the top stoplight.

Fig. 15.55. Removal of a cartridge from a lamp from the top stoplight


Turn a cartridge with a lamp counter-clockwise and remove it together with a lamp from a back lantern (fig. 15.55). Having pulled, take a lamp from a cartridge.
Lamp installation make in sequence, return to removal.
Replacement of a lamp of illumination of a combination of devices
Remove a combination of devices.
From an underside of a combination of devices turn the holder of a lamp counter-clockwise and take it from a payment of a combination of devices.
Having pulled for a lamp, take it from the holder.
Lamp installation make in sequence, return to removal.
Replacement of a lamp of a forward plafond of illumination of salon

Fig. 15.56. Removal of glass of a forward plafond of illumination of salon


Screw-driver edge remove glass of a forward plafond of illumination of salon (fig. 15.56).
Take a lamp from contact clips. For an exception of destruction of a lamp take it for lateral contacts
Lamp installation make in sequence, return to removal.
Replacement of a lamp of a lantern of illumination of licence plate

Fig. 15.57. Отжатие clamps at removal of a lantern of illumination of licence plate


Thin screw-driver wring out 2 clamps and remove a lantern of illumination of licence plate from a luggage space door (fig. 15.57).
Turn a cartridge with a lamp and remove it from a lantern of illumination of licence plate, then remove a lamp from a cartridge.
Lamp installation make in sequence, return to removal.
Replacement of a lamp of an antifog headlight
Lift the car on the lift.
For access to antifog headlights remove forward wheels and грязезащитные guards of arches of forward wheels.

Fig. 15.58. An arrangement of a cartridge with a lamp of an antifog headlight


Turn a cartridge and remove it from an antifog headlight, then remove a lamp from a cartridge (fig. 15.58).
Lamp installation make in sequence, return to removal.