|
THE PREVENTION
Cars are equipped by safety systems (SRS), including pillows of safety and натяжители seat belts. Before work about gauges of blow, the panel of devices and a steering column disconnect at first negative, and then positive the plug from the storage battery and wait 2 minutes It will exclude unapproved disclosing of pillows of safety and operation натяжителей seat belts which can put physical injuries.
|
Replacement of the lock and the cylinder of the lock of ignition make as follows:
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Insert a key into the lock of ignition and turn it in position ACC.
Remove a steering wheel.
Remove casings of a steering column.
Remove combined подрулевые switches.
Disconnect from the ignition lock an electric socket.
|
|
Fig. 15.22. An arrangement of screws of fastening of the lock of ignition to a steering column
|
Turn out screws and remove the ignition lock together with the lock cylinder (
fig. 15.22).
|
|
Fig. 15.23. Extraction of the cylinder of the lock of ignition after key installation in position АСС and clamp pressing
|
Small screw-driver press a clamp in the case of the lock of ignition and for a key take the cylinder of the lock of ignition (
fig. 15.23).
For installation of the cylinder of the lock of ignition, press a clamp and in this position of a clamp, insert the lock cylinder into the case of the lock of ignition, thus a clamp should enter into an aperture and fix the cylinder in the case of the lock of ignition.
The further installation make in sequence, return to removal.