Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
11. Brake system
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
   The general data
   Technical characteristics
   Electric chains
   Check of the storage battery
   Replacement of wires of the storage battery
   Safety locks and the relay
   Check and replacement of the relay of indexes of turn and the emergency light alarm system
   Check of system of gymnastics
   The generator
   System of start-up of the engine
   Replacement combined подрулевых switches
   Replacement of the lock and the cylinder of the lock of ignition
   Removal and installation of switches of the panel of devices
   Removal and installation of a combination of devices
   Check and replacement of the engine of a screen wiper
   Radio receiver and dynamics
   Aerial replacement
   Check and repair of a heater of back glass
   Replacement of lamps in headlights
   Adjustment of light of headlights
   Headlight replacement
   Sound signal
   Replacement of lamps накаливания
   Check of a drive of external rear-view mirrors
   Check of system of the cruise-control
   Check стеклоподъемников with an electric drive
   Check of system of the central blocking of locks
   Drive podemno-sdvizhnoj roof panels
   Safety pillows
Electric equipment schemes




Toyota RAV4>> Electric equipment>> Check of a drive of external rear-view mirrors

Fig. 15.59. An arrangement of components of management of external rear-view mirrors: 1 – the electric motors located in cases of mirrors; 2 – block ECU located from outside of the forward passenger; 3 – the ignition lock; 4 – the switch of adjustment of position of external mirrors; 5 – the block of safety locks from outside the driver


For adjustment of position of each external rear-view mirror 2 electric motors are used: one for adjustment in vertical, the second — in horizontal planes (fig. 15.59).
The switch has the selector which submits pressure on the right or left mirror.
Check of a drive of external rear-view mirrors make as follows.
Include ignition, without starting up the engine. Lower windshields and serially turn mirrors in vertical and horizontal planes, listening to a sound of working engines.
If the engine works, and the mirror does not move, probably, the mechanism of a drive of a mirror is faulty. Remove and disassemble a mirror for definition of a cause of defect.
If mirrors do not move and is not audible works of engines, check up integrity of a safety lock.
If the safety lock is serviceable, remove from the panel of devices the switch and check up its condition.
According to electric schemes check up reliability of connection of wires of the mirrors connected to "weight".
If the mirror still does not work, remove it and check up pressure giving to a mirror.
If there is no pressure even in one position of the switch, check up an electric chain between a mirror and the switch.
If pressure is present at all working positions of the switch, remove a mirror and check up working capacity of electric motors, connecting their additional wires to the storage battery. If engines do not work, replace a mirror.