Aerial removal make as follows.
|
|
Fig. 15.39. An arrangement of screws of fastening of the aerial established on a roof
|
For removal of the aerial established on a roof, turn out 2 screws and separate the aerial from a body (
fig. 15.39).
|
|
Fig. 15.40. A reversing of a core of the aerial established on a wing of the car
|
|
|
Fig. 15.41. A reversing of a nut of fastening of the basis of the aerial established on a wing of the car
|
For removal of the aerial established on a forward wing, turn out an aerial core, then turn out a nut of fastening of the holder of the aerial and separate it from a body (
fig. 15.40,
15.41).
Removal of the automatic aerial make as follows:
Turn a key in the ignition lock in position LOCK and loosen the nuts of fastening of the aerial.
Turn a key in the ignition lock in position ACC and press the button of inclusion of a radio receiver in range АМ, thus the aerial will automatically be put forward before position at which it will be disconnected from the drive mechanism.
Separate a core of the aerial from the holder.
The further removal of aerials of all types make as follows.
On cars with the aerial established on a wing, lift the car on the lift and remove a forward wheel.
On cars with the aerial established on a roof, for access to an aerial wire remove an upholstery of a forward rack.
|
|
Fig. 15.42. An arrangement of a bolt of fastening of the aerial established on a wing of the car
|
On cars with the aerial established on a wing, from under a wheel arch turn out a bolt of fastening of the holder of the aerial (
fig. 15.42).
On cars with the aerial established on a wing, put forward aerial fastening in a wing and remove condensing ring.
Remove a radio receiver and disconnect from it the aerial tip.
On cars with the aerial established on a wing, remove a ware box and extend an aerial wire.
On cars with the automatic aerial disconnect the basis of the aerial and a wire of the aerial from a gear cable of the engine.
