Adjustment of doors make as follows:
Check up a condition of hinges of a door for what open a door and lift it upwards, thus without lifting a body.
If moving of a door more than 1,6 mm, replace door hinges.
After door installation check up, that the backlash on door perimetre was everywhere identical, and also that the external surface of a door was flush with other elements of a body.
For backlash adjustment on door perimetre loosen the bolts of fastening of hinges of a door to a door and, moving a door, adjust its position then tighten fastening bolts.
If thus to adjust door position it is impossible, get and enclose under hinges adjusting plates.
For door installation flush with other elements of a body loosen the bolts of fastening of the hinge of a door to a door also adjust door position then tighten bolts.
|
|
Fig. 14.28. Directions of moving of the shock doggie of the lock of a door for adjustment of position of a back part of a door
|
In last turn
loosen the bolts also adjust position of the shock doggie of the lock of a door so that the back part of a door was flush with a back door or body elements (
fig. 14.28).