Removal and door installation spend necessarily with the assistant as follows:
Lift against the stop door glass.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Open a door and support its supports or jacks, having laid between them and a door pure rags.
Remove an upholstery and пылевлагозащитную a film from a door.
Mark and disconnect from a door all electric sockets, clips of fastening of wires and a wire of connection with "weight".
Disconnect from a door the protective goffered cover and through opened aperture extend wires from a door.
|
|
Fig. 14.25. An arrangement of bolts of fastening of the terminator of opening of a door
|
Turn out bolts of fastening of the terminator of opening of a door (
fig. 14.25).
Marker note position of hinges of a door.
|
|
Fig. 14.26. An arrangement of bolts of fastening of the bottom hinge of a forward door to a door (fastening of the top hinge similar)
|
|
|
Fig. 14.27. An arrangement of bolts of fastening of hinges of a back door to a door
|
While the assistant supports a door, turn out bolts of fastening of hinges to a door and remove a door from the car (
fig. 14.26,
14.27).
For access to bolts of fastening of hinges of a back door open a forward door.
Door installation make in sequence, return to removal, taking into account the following:
Fix пылевлагозащитную a film, having established it without folds and ruptures. The surface on which the film is pasted пылевлагозащитная, should be ideally pure.