Position adjustment podemno-sdvizhnoj roof panels spend as follows:
Lift glass podemno-sdvizhnoj panels of a roof and leave it in this position.
Position adjustment consists in removal of the engine of a drive and moving of cables before combination of labels on cables and a framework from two parties podemno-sdvizhnoj roof panels. For the further adjustment make the following:
|
|
Fig. 14.62. An arrangement of screws (two screws are invisible) glass fastenings podemno-sdvizhnoj roof panels
|
– Turn out 4 screws and remove glass
podemno-sdvizhnoj roof panels (
fig. 14.62);
|
|
Fig. 14.63. An arrangement of screws of fastening of the top console
|
– Remove a plafond of illumination of salon and open a cover for access to the drive engine
podemno-sdvizhnoj panels of a roof and turn out screws of fastening of the top console (
fig. 14.63);
|
|
Fig. 14.64. An arrangement of screws of fastening of the engine of a drive podemno-sdvizhnoj roof panels
|
– Turn out screws and remove the engine, disconnecting it from a pulley with drive cables
podemno-sdvizhnoj roof panels (
fig. 14.64);
|
|
Fig. 14.65. Combination of labels on a cable and a framework podemno-sdvizhnoj roof panels
|
– Move the end of a cable of a drive
podemno-sdvizhnoj panels of a roof before combination of labels on cables and a framework from two parties
podemno-sdvizhnoj roof panels (
fig. 14.65);
– After adjustment establish the drive engine podemno-sdvizhnoj panels of a roof and the top console;
– Adjust position of forward and back parts podemno-sdvizhnoj roof panels for what loosen the screws of fastening of glass and shift it forward or back on the distance providing reliable consolidation of forward and back parts podemno-sdvizhnoj of the panel of a roof, and tighten screws.