Removal of the external handle and the cylinder of the lock of a door of a luggage space make as follows:
Open a door of a luggage space and remove from a door an upholstery and пылевлагозащитную a film.
Through an aperture in the internal panel of a door release plastic clips and disconnect draughts from the external handle of a door and the lock cylinder.
All draughts fasten to the lock plastic clips which it is necessary with effort to remove and take away from draught, then to extend draught from a clip aperture.
On doors with electric blocking of locks disconnect electric sockets from the lock.
Through an aperture in the internal panel of a door turn out screws of fastening of the external handle and remove it from a door.
Turn out the screw () and remove the cylinder of the lock from the external handle of a door.
Installation make in sequence, return to removal, taking into account the following:
Fix пылевлагозащитную a film, having established it without folds and ruptures. The surface on which the film is pasted пылевлагозащитная, should be ideally pure.