Removal of the lock of a door of a luggage space make as follows:
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Open a door of a luggage space and remove from a door an upholstery and пылевлагозащитную a film.
Through an aperture in the internal panel of a door release plastic clips and disconnect from the lock of draught of the external handle of a door and the lock cylinder.
All draughts fasten to the lock plastic clips which it is necessary with effort to remove and take away from draught, then to extend draught from a clip aperture.
On doors with electric blocking of locks disconnect electric sockets from the lock.
|
|
Fig. 14.44. An arrangement of screws of fastening of the lock to a luggage space door
|
Turn out screws of fastening of the lock and remove the lock an aperture in the internal panel of a door (
fig. 14.44). On models till 2001 remove four plastic
заглушки and turn out screws.
Installation of the lock of a door of a luggage space make in sequence, return to removal, taking into account the following:
Fix пылевлагозащитную a film, having established it without folds and ruptures. The surface on which the film is pasted пылевлагозащитная, should be ideally pure.