Removal of a door of a luggage space make as follows.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Remove a spare wheel from a luggage space door.
Open a door of a luggage space and support its supports or jacks, having laid between them and a door pure rags.
Remove from a door an upholstery and пылевлагозащитную a film.
Mark and disconnect from a door all electric sockets, clips of fastening of wires and a wire of connection with "weight".
Disconnect from a door the protective goffered cover, and through opened aperture extend wires from a door.
Turn out bolts of fastening of the terminator of opening of a door.
Marker note position of hinges of a door.
|
|
Fig. 14.42. An arrangement of bolts of fastening of hinges to a door of a luggage space and bolts of fastening of the terminator of opening of a door to a body
|
While the assistant supports a door, turn out bolts of fastening of hinges to a door and remove a door from the car (
fig. 14.42).
Installation of a door of a luggage space make in sequence, return to removal.
Fix пылевлагозащитную a film, having established it without folds and ruptures. The surface on which the film is pasted пылевлагозащитная, should be ideally pure.