Operations on replacement of bolts of fastening of a forward and back wheel are carried out equally.
At replacement of bolts of fastening of a wheel operate as follows:
Loosen the nuts of fastening of a wheel.
Lift the car and establish on support. Remove a wheel.
Remove a brake disk or a brake drum.
Fig. 13.21. Use of a stripper for expression of a bolt of fastening of a wheel from a nave of a forward wheel: 1 – a nave flange; 2 – a nut, partially навернутая on a bolt; 3 – a stripper
Partially screw a nut on a bolt of fastening of a wheel with which it is necessary to replace (fig. 13.21
). A stripper squeeze out a bolt from a nave, turn out a nut and remove a bolt.
Insert a new bolt from an underside into a nave aperture, establish on a bolt some thick washers and, screwing on it a nut, запрессуйте it in a nave.
Establish a brake disk or a brake drum.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel