Тойота РАВ4-Toyota RAV4 1. Car operation 2. Maintenance service 3. Engines 4. Cooling and air-conditioning systems 5. Fuel system and system of release of the fulfilled gases 6. Ignition system 7. The monitoring system and decrease in toxicity of the fulfilled gases    The general data    Technical characteristics    System of onboard Diagnostics (OBD)    Information gauges and executive стройства    Codes of malfunctions of system OBD-II    The engine management block (PCM)    Gauges and valves of system of injection of fuel (EFI)       Replacement of the gauge of position throttle заслонки (TPS)       Replacement of the gauge of absolute pressure of air in an inlet collector on models since 2001       Replacement of the gauge of a measuring instrument of the expense of air (MAF) on models since 2001       Replacement of the gauge of temperature of air arriving in the engine (IAT) on models till 2001       Replacement of the gauge of temperature of a cooling liquid (ECT)       Replacement of the gauge of an angle of rotation of a cranked shaft (CKP)       Replacement of the gauge of position of a camshaft (CMP) on models since 1998       Replacement of gauges of oxygen (O2S) and топливовоздушной mixes (A/F Sensor)       Replacement of gauges of a detonation       Replacement of the gauge of speed of the car (VSS)       Replacement of the valve of a control system with frequency of rotation of idling (IAC)    System of compulsory ventilation of Carter (PCV)    System рециркуляции the fulfilled gases (EGR) on models since 2001    System of catching of steams of fuel (EVAP)    Katalitichesky neutralizer 8. Coupling 9. A transmission 10. A kardannyj shaft and shaft of a drive of driving wheels 11. Brake system 12. A suspension bracket 13. A steering and a running gear 14. A body 15. An electric equipment Electric equipment schemes Toyota RAV4>> The monitoring system and decrease in toxicity of the fulfilled gases>> Gauges and valves of system of injection of fuel (EFI)>> Replacement of the gauge of position throttle заслонки (TPS) The gauge of position throttle заслонки (TPS) is located in an end face of an axis throttle заслонки on throttle knot. Supervising target pressure from TPS, PCM regulates the giving of fuel based on coal of opening throttle заслонки (the requirement of the driver). Loose or faulty TPS will lead to unstable work of the engine and changing frequency of rotation idling because PCM will consider that throttle заслонка turns. Replacement of the gauge of position throttle заслонки (TPS) make as follows. Switch off ignition and disconnect a wire of "weight" from the storage battery. Disconnect an electric socket from the gauge of position throttle заслонки. Fig. 7.6. An arrangement of the gauge of position throttle заслонки on models till 2001 Fig. 7.7. An arrangement of the gauge of position throttle заслонки on models since 2001 Turn out screws and remove the gauge of position throttle заслонки from throttle knot (fig. 7.6, 7.7). Installation spend to sequences, return to removal.