Removal of an external overlay of the panel of devices make as follows:
|
|
Fig. 14.51. An arrangement of screws of fastening of the central overlay of the panel of devices on models since 2001
|
On models since 2001 turn out screws and remove the central overlay from the panel of devices (
fig. 14.51).
|
|
Fig. 14.52. An arrangement of screws of fastening of the bottom central overlay of the panel of devices on models since 2001
|
For removal of the bottom central overlay of the panel of devices on models since 2001 turn out screws and an edge of a flat screw-driver release the bottom part of an overlay from the panel of devices (
fig. 14.52). Not to scratch the panel of devices, wind an edge of a screw-driver with a sticky tape or rags.
On models till 2001 remove a peak of a combination of devices and remove handles of management from the control panel a heater/conditioner.
Also turn out screws of fastening of the panel of furnish under the CD player or a radio receiver and remove the panel.
Edge of a flat screw-driver release the bottom part of an external overlay from the panel of devices.
Not to scratch the panel of devices, wind an edge of a screw-driver with a sticky tape or rags.
Disconnect electric sockets from the back party of an external overlay and remove it from the car.
|
|
Fig. 14.53. An arrangement of clamps of fastening of the bottom central overlay of the panel of devices on models till 2001
|
For removal of the bottom central overlay of the panel of devices on models till 2001 take four clamps and take out an overlay (
fig. 14.53).
Installation of an external overlay of the panel of devices make in sequence, return to removal.
