Removal of a regulator of pressure of fuel make as follows.
Dump pressure in fuel system.
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Remove the block of the fuel pump / of the gauge of level of fuel from a fuel tank.
For models of cars till 2001 the further removal of a regulator make in a following order:
– Remove a clip, securing the a pressure regulator to the fuel filter, then loosen the a collar and remove a hose from a pressure regulator;
|
|
Fig. 5.13. An arrangement of bolts of fastening of a regulator of pressure of fuel to the block of the fuel pump/gauge of level of fuel on models till 2001
|
– Turn out screws and remove a regulator pressure from the block of the fuel pump/gauge of level of fuel (
fig. 5.13);
For models of cars since 2001 the further removal of a regulator make in a following order:
– Remove a plate всасывания from the block of the fuel pump/gauge of level of fuel.
– Release from clamps and remove a fuel tube from a regulator of pressure of fuel.
|
|
Fig. 5.14. An arrangement of a regulator of pressure of fuel in the block of the fuel pump/gauge of level of fuel on models since 2001
|
– Take a regulator of pressure of fuel from the block of the fuel pump/gauge of level of fuel (
fig. 5.14).
Installation of a regulator of pressure of fuel spend to sequences, return to removal, taking into account the following: before installation of a regulator of pressure of fuel necessarily establish on it a new sealing ring.