|
THE PREVENTION
In an operating time of the engine do not bring a hand too close to the fan and do not stand in a plane of rotation of the fan
|
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Disconnect an electric socket from the engine of the fan of a radiator.
On cars of release till 2001 the casing of the fan of the condenser of a central air of air fastens to a radiator one bolt from above and two in the basis. The casing of the basic fan of a radiator fastens two bolts from above and two bolts in the basis.
On cars of release since 2001 the casing of the fan of the condenser of a central air of air fastens to a radiator two bolts from above and two in the basis. The casing of the basic fan of a radiator fastens two bolts from above and two clamps in the basis.
Tighten a lay brake and block back wheels an emphasis.
Lift a forward part of the car and establish on support. Remove грязезащитный a guard of a motor compartment.
On cars of release till 2001 from below the car turn out the bottom bolts of fastening of a casing of the fan.
|
|
Fig. 4.6. An arrangement of the top bolts of fastening of a casing of the fan of a radiator
|
From above from a motor compartment turn out the top bolts of fastening of a casing of the fan and remove it (
fig. 4.6). On cars of release since 2001 release a casing of the fan from clamps in the basis, having pulled it upwards.
|
|
Fig. 4.7. A reversing of the screw of fastening of the fan to an engine shaft
|
Keeping blades of the fan from
проворачивания, turn out the screw of fastening of the fan to a shaft of the engine and remove it (
fig. 4.7). The condenser fan fastens to a shaft of the engine three screws.
|
|
Fig. 4.8. An arrangement of screws of fastening of the engine to a fan casing
|
Turn out screws of fastening of the engine to a casing of the fan and remove the engine (
fig. 4.8).
Installation make in sequence, return to removal.