Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
11. Brake system
   The general data
   Antiblocking system of brakes (ABS)
   Replacement of lobbies brake pads
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement back brake pads
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of brake system
   Replacement of brake tubes and hoses
   Prorolling of a hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of a lay brake
   Replacement of cables of a lay brake
   Adjustment of position of a pedal of a brake
   Check and replacement of the switch of a stoplight
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
Electric equipment schemes

Toyota RAV4>> Brake system>> Replacement of the main brake cylinder>> Removal
On models till 2001 uncover the air filter and the block of safety locks and the relay on the left side of a motor compartment.

Fig. 11.35. The main brake cylinder: And – an electric socket; In – places of connection of brake tubes; With – nuts

Disconnect an electric socket from the gauge of level of a brake liquid (fig. 11.35).
Uncover a compensatory tank of brake system and, using a syringe, pump out a brake liquid.
Mark the brake tubes approaching to the main brake cylinder. Put pure rags under the main brake cylinder for gathering of the leaked brake liquid.
Turn away connecting nuts of fastening of brake tubes and take tubes aside from the main brake cylinder. Close the ends of tubes suitable stoppers.

The brake liquid used in hydraulic system of brakes, is poisonous, therefore at its hit on a skin immediately wash out the amazed site a water considerable quantity. The brake liquid dissolves a paint and plastic, therefore at liquid hit on a paint and varnish covering of the car wash out its considerable quantity of water.

Turn out two nuts and remove the main brake cylinder from the vacuum amplifier of brakes together with a lining. Check up a condition of a sealing ring in an end face of the main brake cylinder and if necessary replace it.