Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
   The general data
   Specifications
   Transmission repair
   The repair and adjusting works which are carried out on cars with a mechanical transmission
      Replacement of cables of management with a transmission
      Removal and installation of the lever of a gear change
      Check and replacement of the switch of lanterns of a backing
      Replacement of an oil radiator of a transmission
      Removal and installation of a mechanical transmission on cars with one leading bridge
      Removal and installation of a mechanical transmission on full - приводных cars
   The repair and adjusting works which are carried out on cars with an automatic transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
11. Brake system
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
Electric equipment schemes


Url onion смотрите на http://onionlinks.net.


Toyota RAV4>> Transmission>> The repair and adjusting works which are carried out on cars with a mechanical transmission>> Check and replacement of the switch of lanterns of a backing
Check

Fig. 9.2. An arrangement of the switch of lanterns of a backing above картера transmissions


The switch of lanterns of a backing is located above картера transmissions (fig. 9.2).
Include ignition and include backing transfer, thus the switch should include backing lanterns.
If backing lanterns have not lighted up, check up serviceability of a safety lock in an electric chain of lanterns of a backing.
If the safety lock is serviceable, disconnect an electric socket from the switch and an ohmmeter check up a condition of its contacts which by the included transfer of a backing should be closed (resistance equally 0). Establish the gear change lever in neutral position, thus switch contacts should be opened and the ohmmeter should show infinitely big resistance (absence of conductivity). In case of malfunction replace the switch.
If the switch is serviceable, check up a condition of an electric chain between a safety lock and the switch. If the electric chain is serviceable, probably, have fused lamps in backing lanterns.
If lamps in backing lanterns are serviceable, check up a wire connecting the switch with lamps.
Replacement
Disconnect an electric socket from the switch of lanterns of a backing.
Turn out the switch from картера transmissions.
Before installation check up the new switch. Connect to contacts of the switch an ohmmeter and be convinced that at pressed плунжере the switch contacts are closed, and at released — are opened.
Screw the switch in картер transmissions and tighten its demanded moment.
Connect to the switch an electric socket.
Check up work of lanterns of a backing.