Removal of the working cylinder of coupling make as follows:
Switch off ignition and disconnect a wire of "weight" from the storage battery.
Turn out a connecting nut and disconnect from the working cylinder a tube transferring pressure of a liquid from the main cylinder of coupling. Отворачивание a connecting nut spend cutting накидным a key not to damage a side on a nut. Rags collect the flowed out brake liquid.
Turn out bolts of fastening and remove the working cylinder of coupling.
Installation of the working cylinder of coupling make as follows:
Establish the working cylinder on картер couplings, be thus convinced that the pusher has entered into dredging of a plug of deenergizing of coupling, and fix its bolts, having tightened them at this stage by hand.
Connect to the working cylinder of coupling a tube and fix its connecting nut. Definitively tighten bolts of fastening of the working cylinder of coupling by the moment 12 Нм.
Add a brake liquid in a tank of brake system and remove air from a hydraulic drive of coupling as it is described in corresponding section.