From under a wing establish a rack into place and insert hairpins of the top fastening of a rack into apertures in a body. By hand screw nuts of the top fastening of a rack. Installation of a rack of a forward suspension bracket make with the assistant, as it heavy enough and bulky.
Connect the bottom part of a rack to a rotary fist and insert two bolts. Screw nuts, combine earlier put labels and tighten nuts.
Fix on a rack an arm with a brake hose. In the presence of ABS establish an arm of a plait of wires of the gauge of speed of rotation of a wheel.
On models since 2001 connect draught of the stabilizer of cross-section stability to an arm on a rack and fix its nut.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel.
Tighten three nuts of the top fastening of a rack of a forward suspension bracket.
Check up and if necessary adjust corners of installation of forward wheels.