Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
11. Brake system
   The general data
   Specifications
   Antiblocking system of brakes (ABS)
   Replacement of lobbies brake pads
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement back brake pads
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of brake system
   Replacement of brake tubes and hoses
   Prorolling of a hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of a lay brake
   Replacement of cables of a lay brake
   Adjustment of position of a pedal of a brake
   Check and replacement of the switch of a stoplight
      Check
      Replacement
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
Electric equipment schemes




Toyota RAV4>> Brake system>> Check and replacement of the switch of a stoplight>> Replacement
Disconnect an electric socket from the stoplight switch.

Fig. 11.45. Backlash measurement between a carving part of the case of the switch and the terminator of a course of a pedal of a brake: And = 0,5–2,4 mm


Loosen the a counternut of the switch of a stoplight also turn out it from an arm of a pedal of a brake (fig. 11.45 see).
Installation make in sequence, return to removal.
After installation adjust height of installation of a pedal of a brake and position of the switch of a stoplight.