Emphasis block forward wheels to interfere with car moving. Lift a back part of the car and establish it on support. Lower the lever of a lay brake and establish the gear change lever in neutral position.
Paint or marker put combination labels on a flange of the main reverse gear and a flange карданного a shaft. It is necessary for repeated installation of a shaft in a starting position, for preservation of balancing of a shaft.
|
Fig. 10.10. A reversing of bolts of fastening of the back universal hinge карданного a shaft to a flange of the main reverse gear
|
Turn away a nut and bolts of fastening of the back universal hinge
карданного a shaft to a flange of the main reverse gear (
fig. 10.10). For access to nuts and bolts turn
propeller a shaft.
|
Fig. 10.11. An arrangement of bolts of fastening of an arm of the basic bearing карданного a shaft to the car bottom
|
Turn out bolts of fastening of an arm of the basic bearing
карданного a shaft to the car bottom (
fig. 10.11).
Take the forward party карданного a shaft from a transmission and take out propeller a shaft in gathering from under the car.