|
|
Fig. 10.3. Removal of a lock ring from an internal SHRUS
|
Remove a lock ring from an internal SHRUS and establish a new ring (
fig. 10.3).
Grease Slots an internal SHRUS трансмиссионным with oil.
Grease working edges of a sealing cuff of differential and, having combined Slots on a shaft and a semiaxial gear wheel of differential, insert a drive shaft into a transmission before fixing by its lock ring.
If it is established driving or an intermediate shaft with the basic bearing, screw bolts of fastening of an arm of the basic bearing or establish a lock ring.
Grease Slots an external SHRUS and, moving a rotary fist in a direction to the car, insert a shaft into a nave.
Establish the bottom cross-section lever of a forward suspension bracket on the spherical hinge of a rotary fist and fix its bolt and nuts.
Nut fix the spherical hinge of steering draught on a rotary fist.
Screw a nut of fastening of a shaft of a drive to a nave. On models since 2001 it is necessary to use a new nut. Preliminary tighten a nut strongly enough.
Undertaken an internal SHRUS, but not for a drive shaft, be convinced that the drive shaft is reliably fixed in a transmission.
Establish a wheel and fix its nuts. Lower the car.
On the car standing on wheels, tighten a nut of fastening of a shaft of a drive to a nave the moment 216 Nm. On models till 2001 screw a counternut and pinом fix it from отворачивания. On models since 2001 a hammer and a punch hammer in a nut fillet into a groove of a shaft of a drive.
Fill in oil in a transmission.