ipiar ru

Тойота РАВ4-Toyota RAV4
1. Car operation
2. Maintenance service
3. Engines
4. Cooling and air-conditioning systems
5. Fuel system and system of release of the fulfilled gases
6. Ignition system
7. The monitoring system and decrease in toxicity of the fulfilled gases
8. Coupling
9. A transmission
10. A kardannyj shaft and shaft of a drive of driving wheels
   The general data
   Specifications
   Shaft of a drive of forward wheels
   Shaft of a drive of back wheels on all-wheel drive cars
   Replacement of protective covers of hinges of a shaft of a drive of a wheel
   Kardannyj shaft
   The basic bearing карданного a shaft
   Sealing cuffs of back main transfer
   Differential on all-wheel drive cars
      Removal
      Installation
11. Brake system
12. A suspension bracket
13. A steering and a running gear
14. A body
15. An electric equipment
Electric equipment schemes




Toyota RAV4>> Kardannyj shaft and shaft of a drive of driving wheels>> Differential on all-wheel drive cars>> Removal
Emphasis block forward wheels to interfere with car moving. Lift a back part of the car and establish it on support. Lower the lever of a lay brake and establish the gear change lever in neutral position.
Merge oil from картера differential.
Paint or marker put combination labels on a flange of differential and a flange of an internal SHRUS of a shaft of a drive.

Fig. 10.4. An arrangement of nuts of fastening of an internal SHRUS of a back shaft of a drive to a differential flange


Turn out 4 nuts, separate internal SHRUS of shaft of a drive from flanges of differential and a soft wire fix them on a body (fig. 10.4 see)

       THE PREVENTION
Do not allow shaft to hang on external SHRUS.

Paint or marker put combination labels on a flange of the main reverse gear and a flange карданного a shaft. It is necessary for repeated installation of a shaft in a starting position for preservation of balancing of a shaft.

Fig. 10.10. A reversing of bolts of fastening of the back universal hinge карданного a shaft to a flange of the main reverse gear


Turn out nuts and bolts of fastening of the back universal hinge карданного a shaft to a flange of the main reverse gear (fig. 10.10 see). For access to nuts and bolts turn propeller a shaft. A soft wire fix a back part карданного a shaft, do not allow it to hang on the basic bearing.

Fig. 10.17. An arrangement of bolts of the top fastening of an arm in a back part of differential


Fig. 10.18. An arrangement of bolts of fastening of a forward part of differential


Support differential трансмиссионным a jack and turn out two bolts of the top fastening of an arm in a back part of differential (fig. 10.17). Turn out two bolts of fastening of a forward part of differential (fig. 10.18). Slowly lower and take differential from under the car.