Remove a cap about naves or a decorative cap of a wheel. On models of release till 2001 take pin and turn out a counternut of fastening of a shaft of a drive to a nave of a back wheel. On models since 2001 unbend the fillet of a nut bent in a groove of a shaft of a drive.
Face key with the big shoulder (with the extension piece) loosen the a nut of fastening of a shaft of a drive to a nave of a back wheel.
Emphasis block forward wheels to interfere with car moving. Loosen the nuts of fastening of a back wheel, then lift a back part of the car and establish it on support. Remove a wheel.
On cars with ABS remove the gauge of speed of rotation of a wheel.
Turn away a nut of fastening of a shaft of a drive to a nave of a back wheel.
Paint or marker put combination labels on a flange of differential and a flange of an internal SHRUS of a shaft of a drive.
|
|
Fig. 10.4. An arrangement of nuts of fastening of an internal SHRUS of a back shaft of a drive to a differential flange
|
Turn away 4 nuts and separate an internal SHRUS of a shaft of a drive from a differential flange (
fig. 10.4).