For coolant addition it is necessary to get the complete set of gymnastics consisting of a cylinder with a coolant in capacity of 0,35 l, конусного the valve and a hose. The konusnyj valve and a hose are connected to the party of low pressure of a central air of air. Connect the gymnastics complete set according to the maintenance instruction applied on the complete set.
Turn out вентильную the handle on the complete set of gymnastics and attach the complete set to a central air, preliminary having checked up a condition of sealing rings and a carving on which the gymnastics complete set is screwed.
Remove a dustproof cap from the channel from outside low pressure of a central air of air and quickly connect the union of a hose of the complete set of gymnastics.
Get the engine and warm up it to working temperature. Include air central air in a mode of the maximum cooling of air. Hold a hose of the complete set of gymnastics as it is possible further from blades of the fan of a radiator and other rotating parts of the engine. The system gymnastics can pass only at the working compressor of the conditioner.
Turn вентильную the handle on the complete set, thus the core should punch a cylinder, then release the handle, and the coolant should start to leave with hissing in a central air. At refuelling hold a cylinder vertically, do not incline and do not move it. For acceleration of process of gymnastics it is possible to wrap up a cylinder the pure rags moistened with hot water.
Insert the thermometer into the central ventilating lattices of the panel of devices at work of a central air of air in a mode of the maximum cooling — the temperature shown by the thermometer should be on 15-20 С below air temperature in car salon.
When all coolant leaves a cylinder, close вентильную the handle and disconnect a hose from the refuelling channel. Establish a new dustproof cap.
|
THE PREVENTION
Never add more than two cylinders of a coolant in air central air.
|