Fill in engine oil and cooling liquid.
Turn out from the engine of a spark plug and disconnect an electric socket of giving of pressure to the fuel pump.
Starter turn a cranked shaft of the engine until the control lamp of pressure of oil will go out.
Screw spark plugs and connect an electric socket of giving of pressure to the fuel pump.
Start up the engine. Probably, engine start-up will be more long as time for pressure creation in fuel system is required.
Warm up the engine to working temperature. In process of engine warming up watch closely possible occurrence of leaks of oil, fuel or a cooling liquid. Occurrence of unusual smells and a smoke from the details which are exposed to influence of a heat, because of burning out of the rests of oil is supposed.
Stop the engine and check up levels of engine oil and cooling liquid and if necessary add.
If new pistons, piston rings, radical and шатунные loose leaves the engine should pass обкатку throughout the first 800 km of run have been established. During the period обкатки operation with completely open throttle заслонкой or with too small speed on any transfer is not supposed.
After обкатки replace engine oil and the oil filter.
After run of 3000 km again replace engine oil and the oil filter.